Uniwill U10-3S4400-M1H1 10.8V 2200mAh Replacement Laptop Battery for Uniwill U10

Product Description

Product Name	Uniwill Uniwill U10-3S4400-M1H1 Laptop Battery
Original Model	Uniwill U10-3S4400-M1H1
Battery Type	Li-ion
Battery Voltage	10.8V
Capacity	2200mAh
Color	Black
Compatible Part Numbers:	Uniwill U10-3S2200-C1L3, Uniwill U10-3S2200-S1S6, Uniwill U10-3S4400-C1L3, Uniwill U10-3S4400-M1H1, Uniwill U10-3S4400-S1S6
Compatible Models:	Uniwill U10 View Uniwill U10 Uniwill U10-3S4400-M1H1 All Details.

How to care for your U10-3S4400-M1H1 battery.

This is the Replacement Uniwill U10-3S4400-M1H1 Battery, You can extend the life of your laptop battery significantly through the proper care and handling of your battery.

Any new U10-3S4400-M1H1 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave laptops plugged in after they have been turned off so that the battery has a full charge the next time you use your laptop. It is probably fully charged within 5 hours.
A brand new U10-3S4400-M1H1 notebook battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the U10-3S4400-M1H1 battery cells active and at their peak potential. When your laptop is plugged into the power adapter the battery goes to 'standby mode' while your laptop runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your U10-3S4400-M1H1 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don't run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the U10-3S4400-M1H1 battery even after 10 minutes will not reduce the battery's life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in laptops, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively 'kill' your U10-3S4400-M1H1 battery.

How can I extend your battery run time?

You can extend your U10-3S4400-M1H1 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Thanks for your purchasing this Replacement Uniwill U10-3S4400-M1H1 Battery