Replacement Laptop Battery for Hp Slate 500 Tablet
Product Description
- Any new Slate 500 Tablet battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave laptops plugged in after they have been turned off so that the battery has a full charge the next time you use your laptop. It is probably fully charged within 5 hours.
- A brand new Slate 500 Tablet notebook battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
- Run on battery power without the AC adapter cord at least once a week to keep the Slate 500 Tablet battery cells active and at their peak potential. When your laptop is plugged into the power adapter the battery goes to 'standby mode' while your laptop runs directly on electricity from the wall outlet.
- Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
- If your Slate 500 Tablet battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
- Don't run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the Slate 500 Tablet battery even after 10 minutes will not reduce the battery's life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in laptops, even the earliest models.
- Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively 'kill' your Slate 500 Tablet battery.
- Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
- Turn off your wireless finder if you are not using the internet.
- Remove any devices plugged into your USB ports or other ports.
- Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
- Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
- Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.
| Product Name | Hp Slate 500 Tablet Laptop Battery |
|---|---|
| Original Model | Slate 500 Tablet |
| Battery Type | Li-ion |
| Battery Voltage | 7.4V |
| Capacity | 30Wh |
| Color | Black |
| Compatible Part Numbers: | AK02, HSTNN-OB1J, HSTNN-DB1J, HSTNN-I82C, NBP2C37, 596244-001, 595342-371, 595342-271 |
| Compatible Models: | Slate 500 Tablet |
How to care for your Slate 500 Tablet battery.
This is the Replacement Hp Slate 500 Tablet Battery, You can extend the life of your laptop battery significantly through the proper care and handling of your battery.
How can I extend your battery run time?
You can extend your Slate 500 Tablet battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.
Thanks for your purchasing this Replacement Hp Slate 500 Tablet Battery
Product's Review
CMS tab
You may also be interested in the following product(s)
